Seal your PRIMERS and more

I live in a world of reality. I think beyond normal events as its better to prepare now in order to care for the handgun that you will rely on for the protection of life and property.
The following are a list of my priorities I feel have become a necessity. NO ONE should ever carry ammunition unless you seal your primers. I like to use bright red nail polish.

Take a box of ammo and paint the entire primer and the lettering on the rear of the case, let it dry completely, when it is absolutely dry take a paper towel and wrap it around your index finger, put nail polish remover on the paper towel and wipe off the back of the case, removing all the red nail polish except what remains in and around the primer and in the lettering, so its easy to see. Put a printed label on the box of ammo or a permanent colored round dot so you can easily identify which box has sealed primers. Your ammunition is now protected from penetrating oil of any kind, from the primer area.

I always went a step further and cleaned each carry bullet with Flitz or Simichrome polish, and then I applied Flitz pure carnuba wax to each bullet that I would constantly carry. It will prevent corrosion and it will feed better. I have been doing this for many years.
People have died because when they needed their handgun, they had a dead primer because of oil penetrating their primer. A product like WD 40 will destroy your primer.

When you select your main semi auto carry hangun you will need to stock extra magazine, recoil, firing pin springs, etc, etc. It never hurts to have a second identical handgun so you could canabalize it for parts in an emergency. I have started using Silicone wire recoil springs that are excellent. If you have selected a Government 1911 pistol stay with the factory standard 16 lb. recoil spring. I only recommend conventional recoil springs. I do not like variable recoil springs.

You must keep your carry gun clean and lightly lubricated, I use Militec (www.militec-1.com)
I clean all my guns with LPS Micro X cleaner (www.lpslabs.com) this cleaner is safe on polymer, I have had no problems. Do not put lubrication on your extractor or breech face or in your magazines. You should have at least 5 magazines. You must have extra parts such as an extractor, firing pin, magazine followers (www.trippresearch.com)
etc. Prepare now so you do not have to worry later.

You will need a good carry holster. I use Alessi (716 691 5615) he also makes my velco belts.
All things mechanical can break at the worst time. Get extra supplies now while they are available, DO NOT WAIT, during hard times they may not be available.
LINKS FOR SPRINGS ARE ON MY HOME PAGE OF MY WEBSITE.

Teddy Jacobson